These Are The Best Type Of Jumper Cables – A List From The Expert

Features :

• N type male to N type male jumper cable | Connector material: nickel-plated brass | Impedance:50 Ohms
• Extension cable type: RG400 | Cable length: 30cm / 12 inches
• Works for 50 Ohm RF application with N type connection, including 4G LTE/WiFi/Ham radio antennas, routers,extenders,etc
• Higher performance coax cable: the cable is low loss RG400 with double shield and a heavy stranded inner conductor, supports interrupted transfer of signals from devices with minimum signal loss
• Package includes: 1pc N male RG400 cable, heat shrink on both ends

Features :

• Jumper cable for 12V Portable charger, Built-in 200Amp Fuse Protection
• Wire: 10 AWG silicone 0.08/1050 O.D. 5.0 Red Black; EC5 Male plastic shell blue, fits 5mm Banana plug.
• Replacement jump box cables, fits most brands of mini portable jump boxes, mobile chargers
• Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle’s positive (+) battery and connect the black to the negative (-) pole, 2)- Plug the cord of jumper cable into the jumper starter’s socket, 3) – and start the vehicle
• Cautions: Do not reverse the operation sequence of jump starter; Do not use jump starter to start vehicle if the number of battery indicators are less then 3 to protect the jump starter from damage; Do remove the product from vehicle within 30 seconds after vehicle is started, or it may cause security incidents.

Features :

• N Male to SMA Male RF Coaxial Cable Adapter for router, antenna, signal enhancer, wireless adapter， LANs etc.
• Connector: N Type Male to SMA Male
• Connecting Line: 50cm(20 inch) 50 Ohm impedance RG316 military quality cable.
• Feature: High temperature resistance, acid resisitance, corrosion resistance, high frequency low loss and low impedance, wide applicability.
• Package Include: 1 Pack RG316 N Male to SMA Male RF Coax adapter with cable.

Features :

• 50 OHM UHF (PL259) Male to N-Type Male Antenna Cable RG400 Coax Cable
• With nickel plated connector body and gold plated brass tin contacts
• Great as jumpers to an antenna tuner, switch, meter or your main antenna
• Connections inside are soldered and the cable is made of copper conductors
• Package: 1 x UHF (PL259) Male to N-Type Male RG-400 RF Coax Cable

Features :

• Connector: All-copper SMA Male to N Male adapter.
• Connecting Line: 15 cm RG316 military quality cable.
• High temperature resistance, acid resistance, corrosion resistance, high frequency low loss and low impedance.
• Wide applicability, easy to use, to ensure high quality communication.
• Package Include: 2pcs RG316 SMA Male to N Male adapter with cable

Features :

• Flat, bendable flat coaxial TV extension cable used to pass through window and door frames. A great drill-free solution
• fit through the window and all kinds of door like glass door,screen door,sliding door,patio door,balcony door and so on. Allow the window or door to be completely closed and sealed
• Bridge the signal from outside into the home easily, suitable for HDTV antenna, OTA antenna, DirectTV and Dish RV satellite
• Extremely slim paper thin only 0.25mm. Color: White, Length: 1ft (32cm)
• Ideal for RVer,Renter and those people who don’t want to drill hole on siding or wall

Features :

• 【High Speed and High Performance】–SPEEDWOLF’s MPO to MPO Patch Cable(MPO FEMALE Connector without PIN) meet Low insertion loss and return loss(Insertion loss:<0.5dB,Return loss:≥25dB);and deliver the performance and reliability needed in todays,appliy for high-speed broadband and data networks.
• 【Sophisticated Design】–SPEEDWOLF’s MPO to MPO Patch Cable utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating,ensure fiber positioning when mating and give excellent performance.The MPO fiber optic patch cord has an aqua sheath with 8pcs 50/125μm fibers and it can support 40 GbE or 120 GbE.
• 【Multi-protocol Support】–SPEEDWOLF MPO fiber optic patch cord MMF (50 / 125um), OM3, LSZH package, 8 fibers, type B polarity (channels 1 to 8), Compatible with IEC 61754-7, TIA / EIA 604 -5, Telcordia GR 326 -CORE, IEEE802BM specification and is often used to connect MPO/MTP cases as well as QSFP + (40Gbe) / QSFP28 (100Gbe) transceivers, etc. SPEEDWOLF MPO-MPO fiber optic patch cable is fully compatible with MTP connectors.
• 【Modular Design, Easy to Install and Maintain】–The SPEEDWOLF MPO-MPO fiber optic patch cord is 8 times more density than standard connectors, saving space and wiring costs. MPO modularity in MPO cabling dramatically reduces the cost of installing, modifying and maintaining structured communication cabling for today’s and tomorrow’s data centers.
• 【100% SATISFIED and Lifetime Free Replacement】–If you are not happy with your buying experience, simply contact us and tell us what we can do to solve the problem! If the product fails to meet your expectations or is not as described, 60-day money-back guarantee, Lifetime Free replacement and Lifetime Friendly Customer Service.

Features :

• For connecting external unit without drilling
• Measurements: Length: 21.5cm
• Flexible length: 18cm
• plug length: 1.75
• Package: 5pcs

Features :

• For connecting external unit without drilling
• Measurements: Length: 21.5cm
• Flexible length: 18cm
• plug length: 1.75
• Package: 2pcs

Features :

• Flat Coax cable,Through Window or door, Female to Female F-Type Cable
• Both end are female Cable Length: 22cm(8.66-inch)
• Flat coaxial cable Bent and sharply folding without damage,for easy and safe door/window feedthrough
• Easy to install and use, without drilling
• 2-Pcs Flat Coaxial RG6 F Type Jumper Cable